BBNWX - LAC. ACRYLIC, N/C, CAM. GRAY 36081/792610

  • MSDS: BBNWX
  • Manufacturer: PRATT AND LAMBERT
  • Product Name: LAC. ACRYLIC, N/C, CAM. GRAY 36081/792610
  • National Stock Number: 8010-00F003841
Product Identification

Product ID:LAC. ACRYLIC, N/C, CAM. GRAY 36081/792610
MSDS Date:01/01/1987
FSC:8010
NIIN:00F003841
MSDS Number: BBNWX

Responsible Party
PRATT & LAMBERT/ANDOVER, KANSAS 67002

Emergency Phone: (316) 733-1361

Cage: EO743

Contractor
PRATT AND LAMBERT INC
2153 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

ISOBUTYL ACETATE (SARA III)

CAS: 110-19-0

RTECS: AI4025000

Fraction By Weight: 40%

OSHA PEL 150 PPM

ACGIH TLV: 150 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ISOBUTYL ALCOHOL (SARA III)

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: <5%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: <5%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 20 - 25%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: <5%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192

Hazards

Effects of Overexposure:INHALATION; ANESTHETIC. IRRITATION OF NOSE,
THROAT, EYES AND POSSIBLE DIZZINESS AND NAUSEA.

First Aid

First Aid:INHALATION: REMOVE FROM EXPOSURE/PROVIDE FRESH AIR. EYES:
FLUSH W/WATER FOR 15 MINUTES. SKIN: REMOVE CONTAMINATED CLOTHING
AND WASH AFFECTED AREA WITH WATER. INGESTION: DON'T INDUCE
VOMITING. CONSULT A PHYSICIAN IMMEDIATELY IN ALL CASES.

Fire Fighting

Flash Point:21F TCC
Lower Limits:1.0%
Extinguishing Media:CO2, DRY CHEMICAL OR ALCOHOL FOAM
Fire Fighting Procedures:WEAR SCBA. CONTAINERS TO PREVENT PRESSURE
BUILD-UP/EXPLOSION
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. CLOSED
CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES/HOT
SURFACES/ELECTRICAL/STATIC OR FRICTIONAL ARKS). VENTILATE
AREA/AVOID BREATHING VAPORS. REMOVE W/INERT ABSORBENT/U
NON-SPARKING TOOLS. STEPS MUST BE TAKEN TO AVOID CONTAMINATION OF
GROUNWATER.

Handling

Handling and Storage Precautions:DON'T STORE ABOVE 120F. CONTAINERS
SHOULD BE BONDED TO EACH OTHER & GROUNDED PROPERLY WHEN TRAFERING
OR POURING INTO ANOTHER CONTAINER.
Other Precautions:DON'T CUT OR WELD ON EMPTY CONTAINERS. DON'T USE
UNTIL ALL SAFETY PRECAUTIONS AND MIXING DIRECTIONS HAVE BEEN READ
AND FULLYNDERSTOOD BY THE USER.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED SUPPLIED-AIR RESP OR HOODS IN
CONFINED AREAS.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV/LEL.
Protective Gloves:IMPERMEABLE
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:USE PROPER PERSONAL PROTECTIVE EQUIPMENT TO
PREVENT SKIN.
Supplemental Safety and Health
MSDS DATED: 10 DEC 1985. ALSO CONTAINS: PHOSPHORIC ACID (TB6300000)
<0.5%/METHYL ISOBUTYL KETONE (EL6475000) <0.5%/XYLENE E2100000)
<0.5%/MINERAL SPIRITS (SE7555000) <0.5%. WT/GAL: 9.0.

Chemical Properties

Boiling Pt:B.P. Text:724F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:5.2
Percent Volatiles by Volume:72%

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ACIDS OR ALKALIS.
Stability Condition to Avoid:AVOIDS FIRES, HEAT, SPARKS AND HOT
SURFACES.
Hazardous Decomposition Products:SMOKE, OXIDES OF NITROGEN AND CARBON
WHEN BURNED.
Conditions to Avoid Polymerization:DON'T ADD DRIERS/REACTIVE CHEMICALS
W/OUT TECH. SUPERVISION.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE IN EPA APPROVED FACILITY. DON'T
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.